Skip to search formSkip to main contentSkip to account menu
DOI:10.1088/1757-899X/659/1/012082 - Corpus ID: 209089656
@article{ljivi2019ComparingTA, title={Comparing the accuracy of 3D slicer software in printed enduse parts}, author={Milan {\vS}ljivi{\'c} and Ana Pavlovi{\'c} and Milija Krai{\vs}nik and Jovica Ili{\'c}}, journal={IOP Conference Series: Materials Science and Engineering}, year={2019}, volume={659}, url={https://api.semanticscholar.org/CorpusID:209089656}}- M. Šljivić, A. Pavlović, J. Ilić
- Published in IOP Conference Series… 31 October 2019
- Engineering, Materials Science
- IOP Conference Series: Materials Science and Engineering
This study aims to compare the accuracy offered by 3D Slicer Software in printing end-use parts inside a Fused Deposition Modeling process of Additive Manufacturing. The purpose, in particular, is to investigate the surface quality and the dimensional stability of the manufactured parts comparing the effect of selecting a different 3D Slicer tool among Simplify3D, Cura and Slic3r 3D. With this scope, parts were produced using these process tools while results were analysed in terms of accuracy…
18 Citations
3
6
Topics
3D Slicer (opens in a new tab)3D Model (opens in a new tab)Additive Manufacturing (opens in a new tab)
18 Citations
- S. CahyatiHaris Aziz
- 2021
Engineering, Materials Science
Jurnal Rekayasa Mesin
Rapid Prototyping (RP) is a manufacturing process that produces a 3D model CAD to be a real product rapidly by using additive manufacturing technology, namely Ideamaker, Repetier Host, and Cura.
- Normariah Che MaideenMuhammad Haziq NazriSalina BudinHyie Koay MeiHamid YusoffShuib Sahudin
- 2023
Engineering, Materials Science
Jurnal Mekanikal
Plastic 3D printing is currently in-trend for producing custom parts and products with intricate geometry. Fused Filament Fabrication (FFF) is one of the preferred technologies, as it requires a…
- PDF
- J. BryłaA. Martowicz
- 2021
Engineering, Materials Science
Machines
The main aim of the present study was to assess the induced changes of the kinematic and geometric properties considered by the slicer for the printing process making use of the G-code readings.
- Ivan GrgićMirko KarakasicH. GlavašP. Konjatić
- 2023
Engineering, Materials Science
Processes
Fused deposition modelling (FDM) 3D printers have the highest annual growth of 21.15% in the field of 3D printing. FDM desktop 3D printers account for 23.69% of FDM printers. The major drawback of…
- 5
- PDF
- M. GolabS. MasseyJ. Moultrie
- 2022
Engineering, Materials Science
Heliyon
- 8
- PDF
- A. MelocchiF. Briatico‐Vangosa A. Zidan
- 2020
Medicine, Engineering
International journal of pharmaceutics
- 59
- PDF
- B. ShimJong-Uk Hou
- 2023
Computer Science, Engineering
Sensors
A regression-based approach utilizing a vision transformer model was proposed that could handle a broad range of data and outperform the current classification models and significantly contributes to the field of 3D printing forensics.
- Igor BelotYixun Sun F. Bertrand
- 2021
Engineering, Materials Science
- 10
- Ruchira ChakrabortyAbhijeet Govind AnoopAbhay ThakurGirish C. MohantaPrasoon Kumar
- 2023
Engineering, Materials Science
ACS omega
Different 3D-printing parameters that facilitate the fabrication of solid scaffolds/ devices with different properties are discussed and an analysis of the choice of surface/bulk modification based on the intended application in tissue engineering is concluded.
- 9
- PDF
- R. Guerra SilvaM. TorresJorge Zahr ViñuelaArístides González Zamora
- 2021
Materials Science, Engineering
Polymers
3D printed FFF lattice structures could represent an improvement compared to other additive manufacturing processes, as they offer good control of cell geometry, and does not require additional post-processing.
- 20 [PDF]
...
...
27 References
- F. BaumannHalil BugdayciJ. GrunertFabian KellerD. Roller
- 2016
Engineering, Materials Science
ABSTRACTWith slicing tools it is possible to convert digital 3D models into printing instructions for 3D printers. The general approach is: The model is cut into horizontal slices which are then used…
- 42
- Highly Influential
- PDF
- M. ŠljivićA. PavlovićJ. IlićMićo StanojevićSlavko Todorović
- 2017
Engineering, Materials Science
This study aims at comparing the accuracy offered by professional and consumer grade 3D printing machines, inside a Fused Deposition Modelling (FDM) process of Additive Manufacturing (AM), in the…
- 14 [PDF]
- S. KassimM. IbrahimN. Sa’udeTun hussein Onn
- 2017
Engineering, Materials Science
Three-dimensional (3D) printing via Fused Deposition Modeling (FDM) technique has gained acceptance in many fabrication arenas due to its outstanding advantages andcurrently there are more than 20…
- 3
- PDF
- L. GalantucciI. BódiJ. KaçaniF. Lavecchia
- 2015
Engineering, Materials Science
- 110
- PDF
- A. Armillotta
- 2006
Engineering, Materials Science
Purpose – Test the detail resolution of fused deposition modeling (FDM) in the direct manufacture of rapid prototypes with textured surfaces.Design/methodology/approach – A benchmark part carrying…
- 149
- A. BoschettoL. Bottini
- 2014
Engineering, Materials Science
Fused deposition modeling (FDM) is a common additive manufacturing (AM) technology able to fabricate physical prototypes directly from virtual model without geometrical complexity limitations.…
- 238
- R. JamiesonHerbert Hacker
- 1995
Engineering, Computer Science
The 3D Systems stereolithography file format is a good workhorse for the rapid prototyping (RP) industry, but input to RP systems is sometimes best suited to the format of sliced contours.
- 262
- A. BelliniS. Güçeri
- 2003
Engineering, Materials Science
Layered manufacturing is an evolution of rapid prototyping (RP) techniques where the part is built in layers. While most of the previous applications focused on building “prototypes”, recent…
- 584
- N. MartelliC. Serrano S. El Batti
- 2016
Medicine, Engineering
Surgery
- 509
- PDF
- J. NaE. Oneida
- 2018
Engineering, Materials Science
Additive Manufacturing
- 12
...
...
Related Papers
Showing 1 through 3 of 0 Related Papers
